Clinton Foundation Pros
Piering and Underpinning in Clinton, UT
Piering and underpinning in Clinton, UT uses steel and helical piers to stop foundation settlement. Free estimates, straight answers on cost.
Serving Clinton and nearby communities.
Piering and underpinning is the fix for a foundation that's actually moving, not just cracked on the surface. Clinton Foundation Pros drives steel push piers or screws in helical piers to reach load-bearing soil below the clay layer that shifts with Davis County's wet springs and dry summers, then transfers your structure's weight off the unstable ground and onto something solid.
Most calls for this come from homes built during Clinton's 1990s-2020s growth run that are now settling for real: separating steps, uneven floors, or a foundation corner that's visibly lower than the rest. This is structural work, done with engineered load calculations, not a patch job.
What's included
What's Included with Piering and Underpinning
Typically included: site excavation at each pier point, pier driving or screwing to refusal depth, foundation bracket attachment, hydraulic lift to raise the structure where possible, and backfill/compaction when finished.
Optional: interior drywall or trim touch-up after lifting, drainage improvements near the repaired section, additional piers beyond the engineered minimum for extra margin.
Customer prep: clear a few feet of access around the foundation perimeter, move vehicles or landscaping near the dig points, and relocate anything stored against the exterior wall being worked on.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Piering and Underpinning Process Works
Step 1Load Assessment
We analyze weight distribution to determine correct pier placement.
Step 2Access Excavation
Small excavation points are opened along the foundation perimeter.
Step 3Pier Driving
Piers are driven or screwed down until they reach stable, load-bearing strata.
Step 4Load Transfer
Brackets connect piers to the foundation to redistribute structural weight.
Step 5Leveling Adjustment
Hydraulic equipment carefully raises the foundation toward its original position.
Step 6Site Restoration
Excavated areas are backfilled and compacted to match the surrounding grade.
Materials
Materials and Methods for Piering and Underpinning
Steel Push Piers
Driven deep past Clinton's shifting clay layer to reach stable soil, these carry heavier structural loads with minimal future movement.
Helical Piers
Screwed in with torque-rated equipment, a good fit for additions or lighter sections where Davis County's variable soil density changes from lot to lot.
Underpinning Brackets
Connect the pier directly to your existing footing so the load transfers cleanly instead of concentrating on one weak point.
Hydraulic Lift Systems
Let us raise the structure in small, controlled increments so settled areas come back level without over-correcting.
Galvanized Coatings
Protect steel piers from corrosion over decades underground, important where seasonal moisture swings keep soil damp for months at a time.
Compacted Fill Material
Packed back around each pier to restore soil stability and prevent the access holes from becoming new settlement points.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Piering and Underpinning Take?
A typical job moves from assessment to finished backfill within about a week for most Clinton homes, longer for larger pier counts.
- 01
Site visit and engineering plan
same day - 02
Permit filing
about 3-5 business days
- 03
Excavation and pier installation
1–3 days - 04
Foundation lift and leveling
1 day - 05
Backfill and site restoration
1 day
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Piering and Underpinning
Before 
After
FAQs
Piering and Underpinning FAQs
How do piers actually stop a foundation from sinking?
Piers bypass the unstable upper soil layer and transfer your home's weight down to soil or bedrock that doesn't shift with moisture, so the foundation stops moving once the load is on the piers instead of the ground.
How many piers does a typical house need?
It depends on the foundation's weight and the extent of settlement, but most single-family homes in this area need anywhere from 6 to 14 piers along the affected section.
Does piering fix existing cracks or just stop future movement?
Piering stabilizes the structure and can lift settled sections back toward level, which often closes cracks, but separate crack injection or patching is usually done afterward to finish the surface.
How long do steel or helical piers last?
Galvanized steel piers are rated for decades of service underground and typically outlast the structure they're supporting.
Do I need a permit for pier installation?
Structural pier work requires a permit from Davis or Weber County in almost every case, and we handle that filing as part of the job.
Can piering be done without digging up my whole yard?
Access points are limited to small excavation pits at each pier location, not a full perimeter trench.
What causes a foundation to need piers in the first place?
Expansive clay soil that swells and shrinks with seasonal moisture is the most common driver locally, along with poor original compaction under the footing.
Next step
Get a Piering and Underpinning Estimate in Clinton
Call (435) 681-4655 for a free, no-pressure look at what your foundation needs. We'll walk the site, explain what we see, and give you a written scope before any work starts.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Clinton with piering, crack injection, and wall stabilization. Free estimates, written scope before work starts.
Wall Stabilization
Wall stabilization in Clinton, UT stops bowing basement walls with steel anchors and carbon fiber. Free estimates, honest cost ranges.
Foundation Crack Repair
Foundation crack repair in Clinton, UT seals structural and water-active cracks with epoxy or polyurethane injection. Free estimates available.
Ask about Piering and Underpinning
Tell us about the project and how to reach you.