
Clinton Foundation Pros
Foundation Crack Repair in Clinton, UT
Foundation crack repair in Clinton, UT seals structural and water-active cracks with epoxy or polyurethane injection. Free estimates available.
Serving Clinton and nearby communities.
Not every crack means your foundation is failing, but not every crack is cosmetic either. Clinton Foundation Pros inspects crack width, direction, and pattern to tell the difference: hairline vertical shrinkage cracks are usually harmless, while diagonal cracks paired with sticking doors point to settlement that needs a structural look before injection.
Clay-heavy soil across Davis County expands and contracts with the seasons, which is the main driver behind cracking in both older and newer homes here. Once we confirm what type of crack you have, we seal it with epoxy or polyurethane depending on whether water intrusion is part of the problem.
What's included
What's Included with Foundation Crack Repair
Typically included: crack inspection and classification, surface cleaning, injection port setup, epoxy or polyurethane injection, and surface finishing.
Optional: exterior waterproof sealing over the repaired section, protective topcoat application, monitoring visit if the crack is borderline structural.
Customer prep: clear a few feet of space along the cracked wall for access and, if it's an exterior crack, trim back any landscaping against that section of foundation.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Foundation Crack Repair Process Works
Step 1Crack Inspection
Each crack is examined to determine type, width, and cause.
Step 2Surface Cleaning
Debris and loose material are removed from the crack area.
Step 3Injection Port Setup
Ports are installed along the crack to allow material injection.
Step 4Sealant Injection
Epoxy or polyurethane is injected to fill and bond the crack.
Step 5Surface Finishing
Excess material is removed and the surface is smoothed.
Step 6Final Inspection
The repair is checked to confirm a watertight and stable seal.
Materials
Materials and Methods for Foundation Crack Repair

Epoxy Injection Resin
Bonds structural cracks back together so the wall regains its original load-bearing strength, the right call for non-moving settlement cracks common in Clinton's older homes.

Polyurethane Foam Sealant
Expands into active water-leaking cracks and stays flexible, a better match for cracks that still see minor movement from seasonal clay soil shifts.

Injection Ports
Spaced along the crack length to get material deep into the gap rather than just surface-coating it.

Surface Primer
Preps the concrete so epoxy or polyurethane actually bonds instead of sitting on a dusty surface.

Masonry Patch Compound
Blends the finished injection line into the surrounding wall so it isn't an eyesore.

Protective Topcoat
Shields the repair from moisture exposure through the next round of spring runoff.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Foundation Crack Repair Take?
Most crack repairs are a same-day job, with slightly longer timelines for multiple cracks or hard-to-reach walls.
- 01
Inspection and classification
same day - 02
Injection and sealing
2–4 hoursper crack
- 03
Surface finishing
same day - 04
Cure time before normal use
24 hours
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Foundation Crack Repair

Before 
After
FAQs
Foundation Crack Repair FAQs
Why do I have diagonal cracks in my basement wall?
Diagonal cracking usually means one section of the foundation is settling faster than the rest, which puts the wall under uneven stress. It's a different cause than vertical shrinkage cracks and usually needs a structural evaluation alongside the crack repair.
How do I know if it's a foundation problem or just a settling crack?
Vertical hairline cracks under about a quarter inch are typically cosmetic shrinkage. Diagonal cracks, cracks wider than a quarter inch, or cracks paired with sticking doors and uneven floors point to active settlement that should be evaluated before you just fill the gap.
Is DIY crack sealing a good idea?
Store-bought caulk or filler can slow a small cosmetic crack, but it doesn't address the soil movement pushing on the wall from outside, so active or growing cracks tend to reopen within a season or two.
How much does foundation crack repair cost in Clinton?
Most standalone crack injection jobs run a few hundred to a little over a thousand dollars depending on crack length and material, significantly less than piering if the crack turns out to be purely cosmetic.
Will foundation cracks get worse if I wait a season?
If the crack is tied to ongoing soil movement, yes, waiting usually means it widens with the next wet-dry cycle. Cosmetic shrinkage cracks tend to stay stable once they form.
Do I need a permit for crack injection?
Standalone epoxy or polyurethane crack injection typically doesn't require a permit. If it's paired with structural pier work, that combined job usually does.
Next step
Get a Foundation Crack Repair Estimate in Clinton
Call (435) 681-4655 for a free crack inspection. We'll tell you straight whether it's cosmetic or structural before recommending a fix.
More services
Other Foundation Repair services

Foundation Repair
Foundation repair in Clinton with piering, crack injection, and wall stabilization. Free estimates, written scope before work starts.

Piering and Underpinning
Piering and underpinning in Clinton, UT uses steel and helical piers to stop foundation settlement. Free estimates, straight answers on cost.

Wall Stabilization
Wall stabilization in Clinton, UT stops bowing basement walls with steel anchors and carbon fiber. Free estimates, honest cost ranges.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.