Clinton Foundation Pros logoClinton Foundation ProsFoundation Repair · Clinton, UT
Menu
french drains in Clinton, UT

Clinton Foundation Pros

French Drains in Clinton, UT

French drain installation in Clinton, UT redirects snowmelt runoff away from your foundation and patio. Free estimates, honest cost ranges.

Serving Clinton and nearby communities.

Standing water on a patio or pooling near the foundation after a storm usually means the ground around your house has nowhere to send runoff. French drains fix that by giving water a path to follow instead of letting it sit against the foundation. That matters a lot in a clay-soil area like Clinton, where snowmelt has to go somewhere once the ground is saturated.

Clinton Foundation Pros trenches along the water's natural path, lays perforated pipe in gravel, and routes the discharge to a safe daylight point or into an existing sump system. This pairs often with basement waterproofing in full-basement homes, since surface drainage and interior water management work together.

What's included

What's Included with French Drains

Typically included: drainage pattern assessment, trench excavation along the planned route, gravel base and perforated pipe installation, and backfill with proper slope.

Optional: catch basin addition for surface water collection points, tie-in to an existing sump discharge line, decorative gravel or sod restoration over the trench.

Customer prep: mark any sprinkler lines or buried utilities in the yard ahead of time and clear the planned trench path of furniture or planters.

How it works

How Our French Drains Process Works

  1. Drainage Assessment photo
    Step 1

    Drainage Assessment

    Water flow patterns are studied to determine the best drain path.

  2. Trench Excavation photo
    Step 2

    Trench Excavation

    A trench is dug along the planned drainage route.

  3. Gravel Base Placement photo
    Step 3

    Gravel Base Placement

    A gravel layer is added to promote proper water flow.

  4. Pipe Installation photo
    Step 4

    Pipe Installation

    Perforated piping is placed to capture and redirect water.

  5. Backfill and Cover photo
    Step 5

    Backfill and Cover

    The trench is filled with gravel and soil to complete the system.

  6. Outlet Testing photo
    Step 6

    Outlet Testing

    Water flow is tested to confirm proper drainage direction.

Materials

Materials and Methods for French Drains

  • Perforated Drain Pipe photo

    Perforated Drain Pipe

    Carries intercepted groundwater away from the foundation, sized for the runoff volume Clinton yards see during spring melt.

  • Gravel Aggregate photo

    Gravel Aggregate

    Surrounds the pipe so water filters in quickly instead of pooling on top of dense clay soil.

  • Filter Fabric photo

    Filter Fabric

    Wraps the gravel bed to keep fine clay particles from washing in and clogging the pipe over time.

  • Outlet Cap photo

    Outlet Cap

    Directs discharge to a safe daylight point well clear of the foundation and any neighboring property line.

  • Catch Basin photo

    Catch Basin

    Collects surface water at low points in the yard before it ever reaches the drain line.

  • Backfill Soil photo

    Backfill Soil

    Restores the trench to grade once the system's in, matched to blend with existing landscaping.

Timeline

How Long Does a French Drains Take?

Most residential french drain runs finish within a day or two depending on length and obstacles along the route.

  1. 01

    Site assessment

    same day
  2. 02

    Trenching

    1 day

    for a typical 40-60 foot run

  3. 03

    Pipe and gravel install

    same day
  4. 04

    Backfill and grade restoration

    1 day

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and After French Drains

  • french drains in Clinton, UT
    Before
  • french drains in Clinton, UT
    After

FAQs

French Drains FAQs

Why is water pooling on my patio instead of draining?

It usually means the grade has flattened or reversed over time, or the soil underneath is too saturated to absorb water quickly. A french drain gives that water a direct path away instead of letting it collect.

How much does french drain installation cost in Clinton?

Cost depends mainly on linear footage and how far the water needs to travel to a safe outlet, with most residential runs costing a few thousand dollars total.

Do I need a permit for a french drain?

If the drain alters grading near a property line or ties into storm drainage infrastructure, a permit is usually required. A straightforward yard drain to a daylight outlet often doesn't need one. Check with your city or county to confirm.

Can a french drain fix a wet basement by itself?

It helps by reducing surface water reaching the foundation, but if water is already entering through the wall or floor joint, interior drain tile and a sump system address that separately.

How long do french drains last?

A properly installed system with gravel and filter fabric typically lasts decades before needing any maintenance, as long as the outlet stays clear.

Is DIY french drain installation a good idea?

Digging a trench is doable, but getting the slope correct toward the outlet is the part that actually makes the system work. A drain installed without consistent fall just becomes an underground puddle.

Next step

Get a French Drains Estimate in Clinton

Call (435) 681-4655 for a free drainage assessment. We'll walk your yard, find where the water's collecting, and map the best path out.

Ask about French Drains

Tell us about the project and how to reach you.

Call (435) 681-4655